Staff Embedded Software & Controls Engineer

Stryker

  • Flower Mound, TX
  • Hybrid
  • Staff/Principal level
  • 4+ yrs experience
  • Embedded Software Engineering
  • Visa: not specified
  • $113k–$188k

The role in 30 seconds

This role involves designing and developing embedded software and control algorithms for electromechanical products. The focus is on solving difficult real-time problems, working close to hardware, and understanding physical system behavior. The engineer will develop code for pressure and temperature control, motors, pumps, sensors, and fluid management systems, contributing to products within Stryker's Urology and Surgical Support portfolios.

Is this role a fit for you?

The backgrounds this role is most likely to hire from, as RoleStack reads the posting.

Strong match

  • Embedded systems / hardware-adjacent
  • Manufacturing & Industrial Equipment
  • Robotics
  • Medical Devices
  • Regulated environment

Workable stretch

  • IoT Devices
  • Automotive Systems
  • Startup / greenfield

Harder transition

  • B2B enterprise platform / workflow software
  • B2C consumer-facing application
  • Software, SaaS & AI Platform

Industry: Healthcare & Life Sciences. See your personal match score

What they're really screening for

Must-haves

  • PLUS Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, Software Engineering, Controls Engineering, or a related field is required.
  • CORE 4+ years of relevant industry experience is required.
  • CORE Strong embedded software development experience using C/C++ is required.
  • CORE Experience developing software on a real-time embedded platform, such as an RTOS, Embedded Linux, or another real-time operating environment is required.
  • CORE Hands-on experience developing or working with feedback-control systems, including PID control, closed-loop control, control-loop tuning, or similar techniques is required.

Nice-to-haves

  • PLUS Experience working with sensors, actuators, motors, pumps, electronics, or other electromechanical systems.
  • CORE Experience using test data, instrumentation, or other engineering methods to evaluate and troubleshoot physical system behavior.
  • CORE Strong debugging and problem-solving skills, including the ability to investigate issues spanning software, hardware, controls, and physical-system behavior.
  • CORE Experience integrating embedded software with hardware and electromechanical systems.
  • CORE Experience developing and tuning closed-loop control systems involving pressure, thermal, motor, pump, flow, sensor, or other physical systems.
  • CORE Experience with Embedded Linux and/or RTOS-based systems.
  • CORE Experience with hardware/software integration and debugging using real-world test data and instrumentation.
  • PLUS Exposure to GUI development using Qt/QML or similar technologies.
  • PLUS Familiarity with .NET Framework and C#.
  • PLUS Familiarity with verification, validation, risk management, design controls, and regulated product development.

Résumé keywords for this role

Terms the posting stresses. Include the ones you can honestly back up.

Tools & technologies

  • C/C++
  • real-time embedded platforms
  • RTOS
  • Embedded Linux
  • real-time operating environment
  • PID
  • closed-loop control
  • firmware
  • low-level interfaces
  • Qt/QML
  • .NET Framework
  • C#
  • Software
  • Systems
  • Electrical

Concepts & phrases

  • Staff Embedded Software & Controls Engineer
  • Work Flexibility: Hybrid or Onsite
  • close to the hardware
  • difficult real-time product problems
  • embedded software and control algorithms
  • pressure and temperature control
  • motors, pumps, sensors
  • fluid management, state machines
  • fault handling
  • Urology portfolio
  • future generations of Surgical Support products
  • write code, run experiments
  • physical system behavior
  • work directly with hardware
  • root cause of a problem

Words that count as the same thing: "Embedded Linux" ≈ Embedded Linux development · "RTOS" ≈ Real-Time Operating System development · "PID" ≈ Proportional-Integral-Derivative control

Check my résumé against these keywords

Hiring at Stryker

All Stryker hiring data

Open senior roles RoleStack tracks right now, posted in the last 30 days.

More open roles at Stryker

Full job description from Stryker

From Stryker's posting. View the original

Work Flexibility: Hybrid or Onsite

It's Time to Join Stryker!

We are looking for a Staff Embedded Software & Controls Engineer who enjoys working close to the hardware and solving difficult real-time product problems.

In this role, you will design and develop embedded software and control algorithms that directly drive product behavior, including pressure and temperature control, motors, pumps, sensors, fluid management, state machines, and fault handling.

Show full description Show less

The role will initially focus on products within our Urology portfolio while contributing to future generations of Surgical Support products.

This is an opportunity for an engineer who likes to write code, run experiments, understand physical system behavior, work directly with hardware, and keep investigating until the root cause of a problem is understood.

What You Will Do

• Design, develop, test, and debug embedded software using C/C++ on real-time embedded platforms.
• Develop and optimize real-time control algorithms for pressure, temperature, motors, pumps, sensors, fluid-management systems, and other electromechanical components.
• Design, implement, and tune feedback-control algorithms, including PID and other closed-loop control approaches.
• Develop state machines, fault handling, diagnostics, logging, and safety-related embedded behaviors.
• Use sensor data, test data, instrumentation, and hands-on experimentation to understand physical system behavior and improve product performance.
• Develop firmware and low-level interfaces for sensors, actuators, motors, pumps, electronics, and other product hardware.
• Investigate and resolve complex interactions across software, firmware, controls, electronics, and the physical system.
• Translate system and product requirements into embedded software and controls solutions.
• Partner closely with Software, Systems, Electrical, Mechanical, Test, Quality, Manufacturing, and Regulatory teams throughout development and post-market support.
• Contribute to technical design reviews, code reviews, verification activities, root-cause investigations, and future product development.
• Support integration, troubleshooting, and continuous improvement of complex electromechanical products.

What You Need

• Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, Software Engineering, Controls Engineering, or a related field is required.
• 4+ years of relevant industry experience is required.
• Strong embedded software development experience using C/C++ is required.
• Experience developing software on a real-time embedded platform, such as an RTOS, Embedded Linux, or another real-time operating environment is required.
• Hands-on experience developing or working with feedback-control systems, including PID control, closed-loop control, control-loop tuning, or similar techniques is required.

Preferred Qualifications

• Experience working with sensors, actuators, motors, pumps, electronics, or other electromechanical systems.
• Experience using test data, instrumentation, or other engineering methods to evaluate and troubleshoot physical system behavior.
• Strong debugging and problem-solving skills, including the ability to investigate issues spanning software, hardware, controls, and physical-system behavior.
• Experience integrating embedded software with hardware and electromechanical systems.
• Experience developing and tuning closed-loop control systems involving pressure, thermal, motor, pump, flow, sensor, or other physical systems.
• Experience with Embedded Linux and/or RTOS-based systems.
• Experience with hardware/software integration and debugging using real-world test data and instrumentation.
• Exposure to GUI development using Qt/QML or similar technologies.
• Familiarity with .NET Framework and C#.
• Familiarity with verification, validation, risk management, design controls, and regulated product development.
• Experience developing medical devices, complex electromechanical products, robotics, industrial automation, or other safety-critical systems.
• Experience working across multidisciplinary engineering teams to solve complex system-level problems.

• $112,900 - $188,100 USD Annual

Travel Percentage: 10%

Stryker Corporation is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status. Stryker is an EO employer – M/F/Veteran/Disability.

Stryker Corporation will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.

FAQ

How much does a Staff Embedded Software & Controls Engineer at Stryker make?

The posted pay for this role is $113k–$188k a year.

How much experience do you need?

The posting asks for 4+ years in embedded software. It is a staff/principal-level role.

Does Stryker sponsor visas for this role?

The posting does not say whether visa sponsorship is available. Ask the recruiter before you apply.

Is this role remote?

It is a hybrid role: part remote, part in the office.

What tools and technologies does the posting mention?

C/C++, real-time embedded platforms, RTOS, Embedded Linux, real-time operating environment, PID, closed-loop control, firmware, low-level interfaces, Qt/QML, .NET Framework, C#, Software, Systems, Electrical.