Sr Power Systems Studies Engineer

Tract Capital Management, LP

  • Alexandria, VA ; Austin, TX ; Denver, CO ; Seattle, WA ; Remote - US
  • Remote
  • Senior level
  • 10+ yrs experience
  • Power Systems Engineering
  • Visa: not specified

The role in 30 seconds

Tract Capital is seeking a Senior Power Systems Studies Engineer to analyze the integrated electrical system for large-scale power infrastructure serving data center campuses. This role will establish study methods, build and validate models, and translate results into actionable design, protection, control, and operating requirements for the entire system from utility interconnection through downstream data center loads.

Is this role a fit for you?

The backgrounds this role is most likely to hire from, as RoleStack reads the posting.

Strong match

  • B2B infrastructure / API / developer tools
  • Internal tooling / back-office systems
  • Data platform / ML pipeline
  • Enterprise-scale (high availability, compliance, large distributed systems)
  • Growth-stage (scaling existing systems, reliability concerns)

Workable stretch

  • B2B enterprise platform / workflow software
  • Software, SaaS & AI Platform
  • Startup / greenfield (build from scratch, speed over polish)

Harder transition

  • B2C consumer-facing application
  • Creator / builder / self-serve tool
  • Marketplace / multi-sided platform
  • Embedded systems / hardware-adjacent
  • Regulated environment (healthcare, finance, government)

Industry: Energy & Utilities. See your personal match score

What they're really screening for

Must-haves

  • PLUS Bachelor’s degree in electrical engineering or a related discipline; master’s degree in power systems is an advantage.
  • CORE 10+ years of relevant experience performing or reviewing power-system studies for utility, generation, transmission, substation, industrial, or mission-critical infrastructure.
  • CORE Demonstrated ability to conduct integrated studies across utility interconnection, HV/MV substations, synchronous generation, BESS/inverter-based resources, and large campus or data center loads.
  • CORE Hands-on proficiency with industry software across the following study categories; equivalent platforms are acceptable: Integrated system and steady-state / short-circuit analysis: ETAP or equivalent, plus experience with a transmission planning tool such as Siemens PSS®E or GE PSLF.
  • CORE Hands-on proficiency with industry software across the following study categories; equivalent platforms are acceptable: RMS dynamic stability: PSS®E, PSLF, PowerFactory, or an equivalent dynamic simulation platform.
  • CORE Hands-on proficiency with industry software across the following study categories; equivalent platforms are acceptable: EMT and controls interaction: PSCAD, EMTP-RV, or an equivalent EMT simulation platform; ability to work with validated generator and BESS control models.
  • CORE Hands-on proficiency with industry software across the following study categories; equivalent platforms are acceptable: Protection coordination and arc-flash: ASPEN OneLiner, ETAP, SKM PowerTools, EasyPower, or equivalent protection-analysis tools.
  • CORE Hands-on proficiency with industry software across the following study categories; equivalent platforms are acceptable: Grounding: CDEGS/SES, ETAP, SKM, or equivalent grounding analysis tools.
  • CORE Hands-on proficiency with industry software across the following study categories; equivalent platforms are acceptable: Engineering automation and data analysis: practical experience with Python, MATLAB/Simulink, or comparable tools for data processing, model QA, and repeatable calculations.
  • CORE Experience preparing, validating, or reviewing models and study reports; identifying assumptions and limitations; and explaining the implications for design and operation.

Nice-to-haves

  • PLUS Professional Engineer (PE) license or ability to obtain licensure.
  • CORE Experience with large data center campuses, mission-critical electrical systems, or phased high-density loads.
  • CORE Experience with reciprocating engine or gas-turbine generation, BESS integration, utility interconnection, and microgrid or islanded operation.

Résumé keywords for this role

Terms the posting stresses. Include the ones you can honestly back up.

Tools & technologies

  • ETAP
  • PSS®E
  • GE PSLF
  • PowerFactory
  • PSCAD
  • EMTP-RV
  • ASPEN OneLiner
  • SKM PowerTools
  • EasyPower
  • CDEGS/SES
  • Python
  • MATLAB/Simulink
  • BESS
  • HV/MV
  • BTM

Concepts & phrases

  • Sr Power Systems Studies Engineer
  • large-scale power infrastructure
  • data center campuses
  • integrated system
  • utility point of interconnection
  • HV/MV substations
  • behind-the-meter (BTM) generation
  • battery energy storage systems (BESS)
  • campus distribution
  • downstream data center loads
  • islanded operating modes
  • load smoothing
  • peak shaving
  • grid-forming
  • Integrated Power-System Modeling

Words that count as the same thing: "BESS" ≈ Battery Energy Storage Systems · "HV/MV" ≈ High Voltage/Medium Voltage · "BTM" ≈ Behind-the-Meter · "EPC" ≈ Engineering, Procurement, and Construction · "OEM" ≈ Original Equipment Manufacturer

Check my résumé against these keywords

Hiring at Tract Capital Management, LP

Open senior roles RoleStack tracks right now, posted in the last 30 days.

More open roles at Tract Capital Management, LP

Full job description from Tract Capital Management, LP

From Tract Capital Management, LP's posting. View the original

Position Overview

Tract Capital is seeking a Senior Power Systems Studies Engineer to lead electrical studies for large-scale power infrastructure serving data center campuses. The role will analyze the integrated system from the utility point of interconnection through HV/MV substations, behind-the-meter (BTM) generation, battery energy storage systems (BESS), campus distribution, and downstream data center loads.

Show full description Show less

The engineer will establish study methods and assumptions, build and validate models, perform or direct technical analyses, and translate results into actionable design, protection, control, and operating requirements. The work includes grid-connected and islanded operating modes, with BESS evaluated for defined applications such as load smoothing and peak shaving. BESS grid-forming, islanding, or backup-power capability must not be assumed unless included in the approved project design basis.

Key Responsibilities

Integrated Power-System Modeling and Studies

• Develop and maintain integrated models spanning the utility source, interconnection facilities, HV/MV substations, BTM generation, BESS, campus distribution, and data center blocks.

• Define study scope, model boundaries, operating cases, contingencies, assumptions, acceptance criteria, and data requirements; document model limitations and study conclusions.

• Perform and review load-flow and steady-state studies, including voltage profiles, losses, equipment and feeder loading, contingency performance, reactive-power needs, and generator/BESS dispatch and charging scenarios.

• Perform and review short-circuit and equipment-duty studies, including fault contributions from utility sources, synchronous generators, and inverter-based resources; verify interrupting, withstand, and bus ratings.

• Perform and review protection coordination, relay settings, breaker-failure and bus protection, grounding and zero-sequence analysis, arc-flash, and protection interfaces across utility, generation, storage, and campus systems.

• Analyze islanded-system stability and operating performance, including generation-load balance, frequency and voltage response, load steps and rejection, load shedding, generator dispatch, reserve requirements, black start, restoration, and resynchronization, as applicable to the design basis.

• Perform or direct RMS dynamic and electromagnetic transient (EMT) studies when appropriate, including generator and BESS controls, inverter interactions, fault response, switching and energization events, islanding transitions, and utility disturbances.

• Assess power quality and transient performance, including harmonics, resonance, flicker, voltage deviation, motor starting, transformer energization, switching transients, and interactions with sensitive data center loads.

• Evaluate BESS charging and discharging for load smoothing and other approved applications, including impacts on load ramps, generator operation, transformer and feeder loading, power quality, protection, and interconnection limits.

• Represent phased data center development and load characteristics in study cases, including block-level demand, large load steps, redundancy configurations, and changes in campus operating scenarios.

• Convert study results into practical requirements for equipment ratings, protection, grounding, controls, operating limits, interconnection, commissioning, and operating procedures.

Utility, EPC, OEM, and Project Coordination

• Coordinate technical study inputs and model exchange with utilities, independent system operators, EPCs, engineering consultants, generator and BESS OEMs, and controls vendors.

• Review utility and consultant studies, interconnection requirements, OEM models, equipment data, and design packages for technical consistency and alignment with project assumptions.

• Identify data gaps, interface risks, and conflicts among utility, generation, BESS, substation, and data center scopes; drive resolution with responsible parties.

• Support project development, design reviews, procurement, commissioning, and energization by communicating study findings, limitations, and open actions to technical and nontechnical stakeholders.

Required Qualifications

• Bachelor’s degree in electrical engineering or a related discipline; master’s degree in power systems is an advantage.

• 10+ years of relevant experience performing or reviewing power-system studies for utility, generation, transmission, substation, industrial, or mission-critical infrastructure.

• Demonstrated ability to conduct integrated studies across utility interconnection, HV/MV substations, synchronous generation, BESS/inverter-based resources, and large campus or data center loads.

• Hands-on proficiency with industry software across the following study categories; equivalent platforms are acceptable:

• Integrated system and steady-state / short-circuit analysis: ETAP or equivalent, plus experience with a transmission planning tool such as Siemens PSS®E or GE PSLF.

• RMS dynamic stability: PSS®E, PSLF, PowerFactory, or an equivalent dynamic simulation platform.

• EMT and controls interaction: PSCAD, EMTP-RV, or an equivalent EMT simulation platform; ability to work with validated generator and BESS control models.

• Protection coordination and arc-flash: ASPEN OneLiner, ETAP, SKM PowerTools, EasyPower, or equivalent protection-analysis tools.

• Grounding: CDEGS/SES, ETAP, SKM, or equivalent grounding analysis tools.

• Engineering automation and data analysis: practical experience with Python, MATLAB/Simulink, or comparable tools for data processing, model QA, and repeatable calculations.

• Experience preparing, validating, or reviewing models and study reports; identifying assumptions and limitations; and explaining the implications for design and operation.

• Strong understanding of generator, inverter-based resource, relay, and control-system behavior relevant to grid-connected and islanded systems.

• Ability to interpret one-line diagrams, protection and control schematics, equipment specifications, utility requirements, and construction documents.

Preferred Qualifications

• Professional Engineer (PE) license or ability to obtain licensure.

• Experience with large data center campuses, mission-critical electrical systems, or phased high-density loads.

• Experience with reciprocating engine or gas-turbine generation, BESS integration, utility interconnection, and microgrid or islanded operation.

#LI-Hybr

Tract Capital Employment

Tract Capital employees enjoy competitive compensation and comprehensive benefits, including 100% employer-covered medical, dental, and vision insurance, a 401K program, standard paid holidays, and unlimited PTO.

NOTE: This job description is not intended to be all-inclusive. Employees may perform other related duties to meet the organization's ongoing needs.

Tract Capital is proud to be an Equal Opportunity Employer. Qualified applicants are considered for employment regardless of age, race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or veteran status. If you need assistance applying for any of our open positions, please contact us at info@tractcapital.com.

FAQ

How much experience do you need?

The posting asks for 10+ years in power-system studies. It is a senior-level role.

Does Tract Capital Management, LP sponsor visas for this role?

The posting does not say whether visa sponsorship is available. Ask the recruiter before you apply.

Is this role remote?

It is a remote role.

What tools and technologies does the posting mention?

ETAP, PSS®E, GE PSLF, PowerFactory, PSCAD, EMTP-RV, ASPEN OneLiner, SKM PowerTools, EasyPower, CDEGS/SES, Python, MATLAB/Simulink, BESS, HV/MV, BTM.