Principal PCS/PMA RTL Design Engineer
Astera Labs
- San Jose, CA
- On-site
- Staff/Principal level
- 3+ yrs experience
- Backend Engineering
- Visa: not specified
- $185k–$240k
The role in 30 seconds
Astera Labs is seeking a Principal PCS/PMA RTL Design Engineer to join our San Jose design team, focused on the Physical Coding Sublayer (PCS) and Physical Medium Attachment (PMA) logic for high-speed interconnect standards such as Ethernet, PCIe, UCIe, and UALink. You will contribute to the architecture, implementation, integration, and verification of PCS/PMA digital logic for high-performance connectivity and networking ASICs.
Is this role a fit for you?
The backgrounds this role is most likely to hire from, as RoleStack reads the posting.
Strong match
- B2B infrastructure / API / developer tools
- Internal tooling / back-office systems
- Enterprise-scale (high availability, compliance, large distributed systems)
- Growth-stage (scaling existing systems, reliability concerns)
Workable stretch
- B2B enterprise platform / workflow software
- Data platform / ML pipeline
- Startup / greenfield (build from scratch, speed over polish)
Harder transition
- B2C consumer-facing application
- Marketplace / multi-sided platform
- Creator / builder / self-serve tool
- Embedded systems / hardware-adjacent
- Regulated environment (healthcare, finance, government)
Industry: Semiconductors & Electronics. See your personal match score
What they're really screening for
Must-haves
- PLUS Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field.
- CORE 3+ years of relevant experience in digital ASIC, SoC, or RTL design, or equivalent academic and industry experience.
- CORE Hands-on experience with Verilog or SystemVerilog RTL development.
- CORE Understanding of digital design fundamentals, including combinational and sequential logic, clocks, resets, state machines, datapaths, FIFOs, and interfaces.
- CORE Working knowledge of at least one high-speed serial protocol (Ethernet, PCIe, UCIe, UALink, CXL, or similar) at the PCS/PHY layer.
- CORE Experience with RTL simulation, debugging, synthesis, and basic timing analysis.
- PLUS Familiarity with ASIC design flows and collaboration across design and verification teams.
- PLUS Strong communication skills and the ability to work effectively in a collaborative, fast-paced environment.
- PLUS Ability and willingness to work onsite in San Jose, California.
- CORE Develop synthesizable Verilog/SystemVerilog RTL for PCS and PMA digital blocks supporting Ethernet, PCIe, UCIe, UALink, and related protocols.
Nice-to-haves
- PLUS Master's degree is preferred.
- CORE Direct experience designing PCS, PMA, or PHY digital logic for Ethernet (25G–224G per lane, 100G/200G/400G/800G/1.6T), PCIe (Gen4/5/6/7), UCIe, UALink, CXL, or similar standards.
- CORE Experience with PAM4 signaling, FEC (RS-FEC/KP4, FLIT-mode FEC/CRC), lane deskew/alignment, link training, and equalization control.
- CORE Familiarity with the PIPE specification, 802.3 Clause 73/72/136/162-series, PCIe LTSSM, and UCIe link training and sideband.
- CORE Experience with multi-lane, multi-rate SerDes digital datapaths and clocking architectures.
- PLUS Familiarity with interconnect, networking, or data-center ASICs (retimers, switches, NICs, DPUs, SmartNICs, NoCs).
- CORE Familiarity with synthesis and implementation tools such as Cadence Genus/Innovus or Synopsys Design Compiler/ICC2.
- CORE Experience with STA using tools such as Synopsys PrimeTime or Cadence Tempus.
- CORE Familiarity with lint, CDC/RDC, DFT, scan, GLS, LEC, UPF, or formal-verification flows.
- CORE Experience with UVM, SystemVerilog Assertions, functional coverage, or verification-plan development.
Résumé keywords for this role
Terms the posting stresses. Include the ones you can honestly back up.
Tools & technologies
- PCS
- PMA
- RTL
- Verilog
- SystemVerilog
- Ethernet
- PCIe
- UCIe
- UALink
- CXL
- 64b/66b
- 128b/130b
- 8b/10b
- RS-FEC/KP4
- FEC framing
Concepts & phrases
- Principal PCS/PMA RTL Design Engineer
- high-speed serial protocol
- synthesizable RTL
- digital design fundamentals
- RTL simulation
- ASIC design flows
- design verification engineers
- protocol compliance
- simulation failures
- logic synthesis
- timing analysis
- Static Timing Analysis
- timing closure
- power optimization
- design implementation flows
Words that count as the same thing: "PCS/PMA" ≈ Physical Coding Sublayer, Physical Medium Attachment · "RTL" ≈ Register-Transfer Level · "ASIC" ≈ Application-Specific Integrated Circuit · "SoC" ≈ System on Chip · "PHY" ≈ Physical Layer
Check my résumé against these keywordsHiring at Astera Labs
Open senior roles RoleStack tracks right now, posted in the last 30 days.
More open roles at Astera Labs
- Principal Design Verification Engineer (AI Fabric Switches) $185k–$240k
- Principal Design Engineer $185k–$240k
- Senior Principal Engineer - FW/SW Development $180k–$250k
- Lead Verification Engineer $160k–$200k
- Principal AI Product Manager $185k–$240k
Full job description from Astera Labs
From Astera Labs's posting. View the original
Astera Labs (NASDAQ: ALAB) provides rack-scale AI infrastructure through purpose-built connectivity solutions. By collaborating with hyperscalers and ecosystem partners, Astera Labs enables organizations to unlock the full potential of modern AI. Astera Labs’ Intelligent Connectivity Platform integrates CXL®, Ethernet, NVLink, PCIe®, and UALink™ semiconductor-based technologies with the company’s COSMOS software suite to unify diverse components into cohesive, flexible systems that deliver end-to-end scale-up, and scale-out connectivity. The company’s custom connectivity solutions business complements its standards-based portfolio, enabling customers to deploy tailored architectures to meet their unique infrastructure requirements. Discover more at www.asteralabs.com.
Show full description Show less
Principal PCS/PMA RTL Design Engineer
Astera Labs is seeking a Principal PCS/PMA RTL Design Engineer to join our San Jose design team, focused on the Physical Coding Sublayer (PCS) and Physical Medium Attachment (PMA) logic for high-speed interconnect standards such as Ethernet, PCIe, UCIe, and UALink. You will contribute to the architecture, implementation, integration, and verification of PCS/PMA digital logic for high-performance connectivity and networking ASICs.
You will work with experienced architects and design engineers to translate microarchitectural specifications into robust, synthesizable RTL. You will collaborate closely with SerDes/analog, verification, physical design, DFT, firmware, systems, and validation teams to deliver reliable designs through synthesis, timing closure, tapeout, and silicon validation.
This is a hands-on opportunity for an engineer who wants to build expertise in multi-protocol, multi-lane PHY digital design and contribute to products that enable next-generation AI and cloud infrastructure.
Key responsibilities
PCS/PMA RTL design and implementation
• Develop synthesizable Verilog/SystemVerilog RTL for PCS and PMA digital blocks supporting Ethernet, PCIe, UCIe, UALink, and related protocols.
• Implement PCS functions such as line encoding/decoding (64b/66b, 128b/130b, 8b/10b), scrambling/descrambling, block and word alignment, lane deskew and reordering, gearboxes, elastic buffers/FIFOs, and rate adaptation.
• Implement forward error correction (e.g., RS-FEC/KP4, FEC framing, interleaving), plus the related error counters and status logic.
• Implement PMA digital interface logic, including SerDes datapath interfaces (PIPE, SerDes-facing parallel interfaces, UCIe PHY/raw-die interfaces), clock and data recovery (CDR) control interfaces, equalization and link-training control (e.g., PCIe LTSSM equalization, Ethernet auto-negotiation/link training), and calibration and adaptation control.
• Design lane-level and multi-lane logic, including lane bonding, polarity and lane reversal, PRBS generation/checking, loopback modes, and BIST features.
• Translate architectural and microarchitectural specifications into datapaths, control logic, state machines, register interfaces, and protocol logic.
• Design reusable, configurable RTL modules that support multiple protocols, data rates, and lane configurations.
• Integrate internal and third-party IP (including analog/mixed-signal PHY macros) while following established design and coding methodologies.
• Participate in design reviews and contribute to improvements in RTL quality, reuse, latency, performance, power, and area.
Verification and design quality
• Collaborate with design verification engineers to define functional requirements, test plans, and coverage goals, including protocol compliance (IEEE 802.3, PCI-SIG, UCIe, UALink specifications).
• Debug simulation failures using waveform analysis, assertions, regression results, and root-cause analysis.
• Support lint, clock-domain crossing (CDC), reset-domain crossing (RDC), and RTL quality checks, with particular attention to multi-clock-domain PCS/PMA boundaries and asynchronous lane clocks.
• Participate in UVM-based verification activities and help resolve functional and integration issues.
• Support gate-level simulation and regression debug as required.
Synthesis, timing, and implementation
• Support logic synthesis, constraints development, and design implementation flows for high-speed, wide-datapath designs.
• Perform Static Timing Analysis (STA) and help identify and resolve setup, hold, clock, and interface timing issues, including at the SerDes and PHY boundaries.
• Support timing closure, power optimization, and PPA trade-offs in collaboration with synthesis, timing, and physical-design teams.
• Assist with DFT integration, scan requirements, low-power intent (including per-lane power states), ECOs, and implementation signoff.
• Review reports and debug issues from Cadence and/or Synopsys digital design flows.
Silicon and cross-functional collaboration
• Support block-level and subsystem-level integration through tapeout milestones.
• Collaborate with SerDes/analog, physical design, DFT, firmware, systems, packaging, and validation teams.
• Participate in silicon bring-up, link bring-up, interoperability and compliance testing, post-silicon debug, and failure analysis as opportunities arise.
• Document design decisions, issues, and technical solutions clearly for cross-functional stakeholders.
Basic qualifications
• Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field.
• Master's degree is preferred.
• 3+ years of relevant experience in digital ASIC, SoC, or RTL design, or equivalent academic and industry experience.
• Hands-on experience with Verilog or SystemVerilog RTL development.
• Understanding of digital design fundamentals, including combinational and sequential logic, clocks, resets, state machines, datapaths, FIFOs, and interfaces.
• Working knowledge of at least one high-speed serial protocol (Ethernet, PCIe, UCIe, UALink, CXL, or similar) at the PCS/PHY layer.
• Experience with RTL simulation, debugging, synthesis, and basic timing analysis.
• Familiarity with ASIC design flows and collaboration across design and verification teams.
• Strong communication skills and the ability to work effectively in a collaborative, fast-paced environment.
• Ability and willingness to work onsite in San Jose, California.
Preferred qualifications
• Direct experience designing PCS, PMA, or PHY digital logic for Ethernet (25G–224G per lane, 100G/200G/400G/800G/1.6T), PCIe (Gen4/5/6/7), UCIe, UALink, CXL, or similar standards.
• Experience with PAM4 signaling, FEC (RS-FEC/KP4, FLIT-mode FEC/CRC), lane deskew/alignment, link training, and equalization control.
• Familiarity with the PIPE specification, 802.3 Clause 73/72/136/162-series, PCIe LTSSM, and UCIe link training and sideband.
• Experience with multi-lane, multi-rate SerDes digital datapaths and clocking architectures.
• Familiarity with interconnect, networking, or data-center ASICs (retimers, switches, NICs, DPUs, SmartNICs, NoCs).
• Familiarity with synthesis and implementation tools such as Cadence Genus/Innovus or Synopsys Design Compiler/ICC2.
• Experience with STA using tools such as Synopsys PrimeTime or Cadence Tempus.
• Familiarity with lint, CDC/RDC, DFT, scan, GLS, LEC, UPF, or formal-verification flows.
• Experience with UVM, SystemVerilog Assertions, functional coverage, or verification-plan development.
• Experience with Python, Tcl, Perl, Shell, or other scripting languages for design and verification automation.
• Exposure to advanced-node CMOS design (e.g., 5nm/3nm), tapeout, silicon bring-up, or post-silicon validation, including BER measurements and lab debug.
• Experience working with physical-design teams on floorplanning, congestion, timing, power, and implementation challenges.
Salary range is $185,000 to $240,000 depending on experience, level, and business need. This role may be eligible for discretionary bonus, incentives and benefits.
We know that creativity and innovation happen more often when teams include diverse ideas, backgrounds, and experiences, and we actively encourage everyone with relevant experience to apply, including people of color, LGBTQ+ and non-binary people, veterans, parents, and individuals with disabilities.
FAQ
How much does a Principal PCS/PMA RTL Design Engineer at Astera Labs make?
The posted pay for this role is $185k–$240k a year.
How much experience do you need?
The posting asks for 3+ years in digital asic, soc, or rtl design. It is a staff/principal-level role.
Does Astera Labs sponsor visas for this role?
The posting does not say whether visa sponsorship is available. Ask the recruiter before you apply.
Is this role remote?
It is an on-site role.
What tools and technologies does the posting mention?
PCS, PMA, RTL, Verilog, SystemVerilog, Ethernet, PCIe, UCIe, UALink, CXL, 64b/66b, 128b/130b, 8b/10b, RS-FEC/KP4, FEC framing.