C&DH Development Engineer, Senior

Axiom Space

  • Remote - US
  • On-site
  • Senior level
  • 5+ yrs experience
  • Embedded, Firmware & Autonomy Engineering
  • Visa: not specified

The role in 30 seconds

Axiom Space is seeking a Senior C&DH Development Engineer to own the design and development of the Command and Data Handling subsystem for the Axiom Station. This role defines the C&DH architecture, selects avionics, ensures radiation hardness and reliability, and leads requirements definition and integration with other spacecraft systems. The engineer will provide technical oversight during testing and resolve mission-critical issues to ensure reliable vehicle operation.

Is this role a fit for you?

The backgrounds this role is most likely to hire from, as RoleStack reads the posting.

Strong match

  • Embedded systems / hardware-adjacent
  • Data platform / ML pipeline
  • Regulated environment (healthcare, finance, government)
  • Enterprise-scale (high availability, compliance, large distributed systems)

Workable stretch

  • B2B infrastructure / API / developer tools
  • Growth-stage (scaling existing systems, reliability concerns)

Harder transition

  • B2C consumer-facing application
  • Internal tooling / back-office systems
  • Startup / greenfield (build from scratch, speed over polish)

Industry: Defense & Aerospace (space systems). See your personal match score

What they're really screening for

Must-haves

  • CORE Bachelor's degree in Electrical Engineering, Computer Engineering, or equivalent
  • CORE 5+ years experience in circuit and PCB design
  • CORE Experience with design, analysis, and integration of spacecraft avionics, embedded systems, and data handling protocols
  • PLUS Experience working in a lab setting with oscilloscopes, multimeters, spectrum analyzers, VNAs, and related lab equipment
  • PLUS Experience using EDA software such as Altium Designer
  • CORE Working knowledge of I2C, SPI, SpaceWire, Ethernet, RS422/485, UART, USB, and similar spacecraft communications protocols
  • PLUS Experience implementing ADCs and analog sensing circuits such as radiometric, 4-20mA, and related
  • CORE Experience with high-speed and mixed-signal digital designs
  • PLUS Familiar with IPC standards for board design; preference for experience designing IPC class 2 and 3 PCBs
  • PLUS Experience with product life cycle and designs from concept through production

Nice-to-haves

  • PLUS Experience in integration and test in spacecraft, aerospace, defense, or other high reliability programs
  • PLUS Familiarity with interface control documents, requirements management tools such as Jama or DOORS, or configuration management practice
  • PLUS Exposure to laboratory or test operations, including equipment procurement, facility readiness, or test scheduling
  • PLUS Familiarity with industry or space program standards such as NASA SSRI, IEEE-ISTO-MOSA-IF-S-001, MIL-STD-1553, NASA-STD-7002, or NASA-STD-3001
  • PLUS Engineer in Training certification, or progress toward professional certification
  • PLUS Vehicle integration experience

Résumé keywords for this role

Terms the posting stresses. Include the ones you can honestly back up.

Tools & technologies

  • Altium Designer
  • I2C
  • SPI
  • SpaceWire
  • Ethernet
  • RS422/485
  • UART
  • USB
  • ADC
  • 4-20mA
  • IPC standards
  • IPC class 2
  • IPC class 3
  • Jama
  • DOORS

Concepts & phrases

  • C&DH Development Engineer
  • Command and Data Handling
  • circuit and PCB design
  • spacecraft avionics
  • embedded systems
  • data handling protocols
  • Interface Control Documents
  • high-speed and mixed-signal digital designs
  • controlled-impedance and controlled-length signals
  • product life cycle
  • concept through production
  • EMI/EMC
  • validation tests
  • technical writing
  • verification documentation

Words that count as the same thing: "C&DH" ≈ Command and Data Handling, Command & Data Handling · "EDA" ≈ Electronic Design Automation · "ICD" ≈ Interface Control Document · "COTS" ≈ Commercial-off-the-shelf · "EMI/EMC" ≈ Electromagnetic Interference/Electromagnetic Compatibility

Check my résumé against these keywords

Hiring at Axiom Space

Open senior roles RoleStack tracks right now, posted in the last 30 days.

More open roles at Axiom Space

Full job description from Axiom Space

From Axiom Space's posting. View the original

OVERVIEW

Axiom Space is a human space exploration company, building era-defining space infrastructure and delivering technology-driven solutions that will empower civilization to transcend Earth. Beginning with Axiom Station, successor to the International Space Station, the company is pioneering a next-generation orbital settlement that will foster groundbreaking innovation and research in microgravity and drive the global space economy of tomorrow. Today, guided by the vision of leading humanity's expansion off planet, Axiom Space is the principal provider of commercial human spaceflight services and developer of advanced spacesuits for the Moon and beyond. For more information about Axiom Space, visit www.axiomspace.com.

Show full description Show less

Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic C&DH Development Engineer, Senior who is fueled by high accountability, execution horsepower, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond.

POSITION SUMMARY

Since Axiom Space is a very complex work environment, we are looking for a resilient, high-energy C&DH Development Engineer, Senior to own the design and development for the Axiom Station’s Command and Data Handling (C&DH) subsystem.

The C&DH subsystem for the Axiom Space Station is composed of flight computers and network switches that enable flight control of each module across all phases of flight including berthing to the International Space Station and independent operations. You will be responsible for creating the spacecraft subsystem that manages commands, telemetry, and internal data flows, ensuring the vehicle operates reliably and meets mission objectives. Technical scope grows around that core as you learn the program: interface data checks, PCB card design, test readiness, supplier data intake, and review package preparation.

KEY DUTIES & RESPONSIBILITIES

• Define the C&DH architecture (onboard computer, memory, interfaces) aligned with mission requirements, constraints, and fault management needs.
• Select and trade avionics architectures to balance performance, power, mass, cost, and reliability
• Ensure designs meet radiation hardness, reliability, and resilience standards for space environments.
• Lead requirements definition and develop Interface Control Documents (ICDs) for integration with other spacecraft systems.
• Integrate with other vehicle and test functions including thermal control, flight software, power distribution, test facilities, and test support equipment.
• Specify functional, performance, and environmental requirements for the C&DH subsystem.
• Document design decisions, trade studies, and verification plans.
• Provide technical oversight during integration, system-level testing, and acceptance testing.
• Resolve technical issues and ensure the C&DH subsystem meets all mission-critical performance goals.
• Lead vendor selection and make/buy decisions, balancing technical risk, schedule, cost, and lifecycle support.
• Evaluate commercial-off-the-shelf (COTS) components for suitability and reuse potential.
• Communicate progress, status, and issues honestly and early, including when something is not working.
• Perform additional job duties as assigned.

QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education & Experience

• Bachelor's degree from an accredited college or university inElectrical Engineering, Computer Engineering, or equivalent.
• Level 3: 5 or more years’ experience in circuit and PCB design. An equivalent combination of education and experience may be considered.
• Experience with the design, analysis, and integration of spacecraft avionics, embedded systems, and data handling protocols.
• Experience working in a lab setting and proficiency working oscilloscopes, multimeters, spectrum analyzers, VNAs, and related lab equipment.
• Experience using EDA software such as Altium Designer.
• Working knowledge of I2C, SPI, SpaceWire, Ethernet, RS422/485, UART, USB, and similar spacecraft communications protocols.
• Experience implementing ADCs and analog sensing circuits such as radiometric, 4-20mA, and related.
• Experience with high-speed and mixed-signal digital designs.
• Familiar with IPC standards for board design; preference for experience designing IPC class 2 and 3 PCBs.
• Experience with product life cycle and has worked on designs from concept through production.
• Vehicle integration experience is a plus
• Has experience supporting EMI/EMC and other validation tests
• Experience designing and routing controlled-impedance and controlled-length signals.
• Clear technical writing, and the ability to produce verification documentation, status material, and review packages that other people can act on.
• Curiosity, initiative, and the willingness to ask a question early rather than deliver a wrong answer late.
• Comfort working in an ambiguous, fast-moving environment where the answer is often not yet written down.

Preferred Qualifications

• Experience in integration and test in spacecraft, aerospace, defense, or other high reliability programs.
• Familiarity with interface control documents, requirements management tools such as Jama or DOORS, or configuration management practice.
• Exposure to laboratory or test operations, including equipment procurement, facility readiness, or test scheduling.
• Familiarity with industry or space program standards such as NASA SSRI, IEEE-ISTO-MOSA-IF-S-001, MIL-STD-1553, NASA-STD-7002, or NASA-STD-3001.
• Engineer in Training certification, or progress toward professional certification.

Core Skills

• Passion for space and the mission
• Entrepreneurial, growth mindset
• High EQ and ability to collaborate within teams and cross-functionally
• Tech-solutioning in using systems and tools to move smarter and faster

Core Competencies:

Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies:

• Accountability
• Technical Rigor
• Execution Discipline
• Pride of Delivery

WORK ENVIRONMENT:Generally, an office environment, but can involve inside or outside work depending on the task.

Requirements

• This position may require access to export controlled technical data or technology subject to NASA regulations, International Traffic in Arms Regulations (ITAR), or Export Administration Regulations (EAR). In accordance with U.S. export control laws, final candidates may be required to undergo additional export control screening to determine eligibility for access. Meeting these requirements is a condition of employment.
• Management has the prerogative to select at any level for which the position is advertised
• Must be willing to work evenings and weekends as needed to meet critical project milestones

Physical Requirements

• Work may involve sitting or standing for extended periods (90% of the time)
• May require lifting and carrying up to 25 lbs. (5% of the time)
• Equipment and Machines
• Standard office equipment (PC, phone, printer, etc.)

Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.

FAQ

How much experience do you need?

The posting asks for 5+ years in circuit and pcb design. It is a senior-level role.

Does Axiom Space sponsor visas for this role?

The posting does not say whether visa sponsorship is available. Ask the recruiter before you apply.

Is this role remote?

It is an on-site role.

What tools and technologies does the posting mention?

Altium Designer, I2C, SPI, SpaceWire, Ethernet, RS422/485, UART, USB, ADC, 4-20mA, IPC standards, IPC class 2, IPC class 3, Jama, DOORS.